Developed by our engineers and tested by many climbers, this 10 mm rope is designed for those who require a strong and easy-to-secure rope.
Do you want to improve your outdoor skills? You can use this highly durable rope for all your attempts!
- Ergonomic gripIts 10 mm diameter, combined with its flexibility, ensures a safe belay.
- StretchGood shock absorption, warranty throughout the rope's lifetime (9.4 kN).
- Lightweight65 g/m
- Abrasion resistance32% sheathing and braiding for long-lasting flexibility.
- Ease of useImmediately ready for use without twisting thanks to the skein-like coiling
- All of our ropes are designed and tested in Chamonix, in the Mont Blanc valley. They are made in northern France by our manufacturing partner, Cousin, expert rope makers for 170 years.
- It's important to properly care for your rope to reduce wear. As dirt wears ropes down, we recommend: 1- using a rope cover; 2- If the rope is dirty, wash it with clean, lukewarm water. Should stains persist and you want to wash it with soap, it is important to use a pH-neutral soap (such as Marseille/household soap) and then rinse thoroughly with clean water. 3- Air dry the rope out of the sun and away from all sources of heat.
- It is important to check your rope regularly. To do so, run the rope through your hands and inspect it metre by metre along its entire length. This will allow you to spot any nicks, cuts, abrasion or weak points. If you notice any anomalies or irregularities, if the core is visible in certain places, if the rope is deformed or has exceeded its fall rating, it must be changed. Take safety seriously!
- Our designers have chosen to colour the threads of the sheath using "Dope dye" technology (the threads in the core are not dyed). This technology adds colour pigments as early as the manufacturing stage, before the strands are braided. This method stands out from traditional dyeing techniques by reducing the amount of water needed and the amount of waste water discharged from the dyeing baths.
- For a single rope, the rope must be exposed to 10 kg of tension for 1 minute in very precise temperature and moisture conditions. But the standard allows us to compare ropes objectively.
- Ropes should be stored in a cool, dry place, away from light, humidity, and corrosive agents. Never leave ropes inside a car during summer, for example.
- EN 892 certified rope UIAA 101 certified rope
- As they get older, all climbing ropes get shorter. Usually, they get 2 to 5% shorter, but this can reach up to 10% depending on humidity, heat, falls, washing, etc. To decrease this effect, we calculate an extra margin of length when manufacturing our ropes, but sometimes this isn't enough. This is why we recommend regularly measuring your rope and checking the rope's middle mark.
- To improve your safety, this rope features a black mark which indicates the middle of the rope. We recommend always checking the length of the route before climbing as well as tying a knot at the end of the rope.
- They are measured and validated in the laboratory by a certification body in accordance with standard EN 892: Number of falls: 8 Impact force: 9.4 KN Sheath percentage: 32% Dynamic elongation: 29.6% Static elongation: 6.5% Sheath slippage: 0 mm
