Surfing, bodyboarding and other water sports in water between 17°C and 22°C for sessions of up to 2 hours. Suitable for all levels.
A 3/2mm surf wetsuit made from 85% natural rubber, with plenty of stretch across the upper body for greater freedom of movement. Recommended for water temperatures between 17°C and 22°C
- Freedom of movementMore flexible component on the upper body and arms. Stretch seams.
- Reduced chafingUnderarm and crotch inserts for greater comfort.
- Easy dressingBack zip with long pull tab for easy, independent dressing.
- Waterproof3 & 2 mm stitched/glued component, under-zip flap. Adjustable neck. Snug fit
- The first selection criterion when choosing a surfing wetsuit is the water temperature. Water temperature varies according to the location and the time of the year. Systematically make sure that the water temperature at your spot corresponds to the recommended temperature range: Water at 21°C. Water between 17 and 22°C. Water between 12 and 17°C. Water between 7 and 12°C. Visit the site seatemperature.org to find out the temperature of your spot.
- The 2nd criterion to take into account is the length of your sessions. If your sessions last less than an hour, the 100 models are suitable. Up to 2 hours: opt for the 500 models and for up to 3 hours, the 900 models. Compared to the 100 models, the 500 models will be more efficient at reducing fatigue (more freedom of movement) and irritation. The same is true for the 900 models compared with the 500 models. NOTE: the 100 and 500 models are easier to put on.
- To make the most of the features of your wetsuit, it is necessary to choose the correct size. A surfing wetsuit should be a tight fit and there should be no visible folds. When dry, it is perfectly normal to feel like it is too tight, this discomfort disappears as soon as the wetsuit gets wet. If you pick a wetsuit that is too big, folds will form and may cause irritation. Try it on before you buy it!
- This 3/2 surfing wetsuit 500 is made from natural rubber. The neoprene is lined with synthetic fabric for added resistance to wear. The component is 2 mm thick. The component is made from a foam with insulating properties. We test and guarantee the thermal quality of our materials.
- The neck finish has been developed to limit irritations. According to the sensitivity of the wearer, a UV top can be worn under the wetsuit to reduce the risk of irritation. The application of grease (e.g. Vaseline) in friction areas (neck, underarms) is also recommended if wearing the diving suit for long periods. Make sure the flap is always inside the wetsuit to limit the risk of irritation with the zip and the neck.
- Our zips and fastenings are laboratory tested in order to ensure an optimal lifespan and good resistance to salt water. We have put the zip at the back of the wetsuit for more comfort during surf sports (when lying down to paddle).
- The seams are stitched and glued to guarantee waterproofing and resistance. The seams are blind-stitched, which means the thread does not pass through the entire thickness of the component and so prevents water from getting through. The absence of threads on the inside avoids irritation and chafing. Comfort and reinforcement patches are strategically placed on the inside in sensitive areas.
- Our wetsuits are designed to meet the needs of the most demanding surfers. Our design choices also make them compatible with other water sports such as swimming, kite surfing, windsurfing, wakeboarding, water skiing, sea wading or SUP (stand up paddle boarding).
- When we are in the water, we lose more than half of our body heat through our extremities (feet, hands, head). Consequently, here are the recommended accessories: - in water >17°C => low booties. - in water 12–17°C: High booties (boots) and gloves. - in water 7–12°C: High booties (boots), gloves, hood and hooded top.