Are you used to riding? We like to offer you comfort! The Warmseat and knee pads make all the difference on these trousers.
Stay warm and dry, the fabric is waterproof. Sit down as many times as you like: the trousers increase insulation from the cold by 50%. In the snow, your knees are also protected!
- RobustnessComponents resist abrasion, tearing and traction force.
- User comfortRemovable foam pads for greater comfort when kneeling in the snow.
- Waterproof15,000mm (Schmerbers) membrane and taped seams
- Freedom of movementRegular fit, better freedom of movement, even with protective shorts
- WarmthFaux-down wadding 80g/sqm and Warmseat technology
- BreathabilityBreathable component and mechanical ventilation between the legs - 10,000g/sqm/2
- AdjustableAdjustable waist and removable foam knee pads
- The model is wearing a size L and measures 182cm. Measurements: Waist size: 100cm Hip measurement: 102cm
- For the two years of guarantee, if your product can be repaired, the repairs (hooks, seams, zips, etc.) are done free of charge. Beyond this period, they can still be done for a fee, locally at your usual shop.
- To withstand bad weather (rain, snow, wind, etc.), these trousers have been designed with a waterproof component and assembly processes that keep the water out and reduce wind chill. We have spent a few days snowboarding and carried out tests over long periods, in all conditions, to validate the waterproofing of the product.
- The water-repellent feature makes water run off the fabric without seeping in thanks to a treatment applied to its outer surface. The fabric does not soak up water and stays light and warm. This treatment must be renewed during the life of the product, after 2 to 3 washes on average, using the products available in our stores. All the waterproof trousers that we design for snowboarders are water-repellent.
- As well as the waterproof fabric, we enhance the waterproofing of the trousers with taped seams. These are heat-bonded waterproof strips placed on the seams inside the clothing to make it perfectly watertight. All seams are taped on the entire skiing outfit.
- To keep you warm, we use faux-down wadding insulation. Wadding is a synthetic component made from polyester which stores more or less air, depending on the length of the fibres. The Snowboard 500 trousers also come with WARM SEAT technology which improves the insulation on the seat by 54% when sitting in the snow.
- A membrane is an extremely thin component (between 5 and 25 micrometres) applied to the internal surface of a textile substrate to give it excellent waterproof and breathable capabilities. Our membrane components stop water getting inside while allowing the water vapour generated by your body to pass through, when snowboarding.
- To optimise the performance and durability of your trousers, we recommend: * Machine wash at 30°, synthetic programme. * Turn the product inside out. * Add a small amount of detergent. No softener. * We recommend you wring it by hand. * Dry on a hanger in a warm, well-ventilated place. Do not dry clean. Do not place on a radiator. You can restore the water resistance of the outer fabric using a fabric waterproofing spray. Read the care label.
- In order to keep warm and dry, we recommend using the 3-layer rule. The principle is simple: wear 3 layers of clothing, which each have a specific function. Your base layer must produce and retain warmth. Your protective shorts keep you warm (and protect you from knocks), whereas the jacket protects you from the weather. All these layers should be breathable to wick away moisture.
- The trousers have elasticated gaiters at the ankles to cover the boots. If you fall or come into contact with fresh snow, the seal created by the gaiter keeps the snow out.