Waterproof three-layer jacket (25,000 Schmerbers) with taped seams and zips. Give yourself the best protection for your most demanding hikes.
Featuring the Novadry label, this 3-layer jacket combines waterproofing with breathability: 25,000 Schmerbers membrane, sealed seams and 40 cm side zips to adjust the temperature to suit your needs.
- WaterproofNovadry technology: 3-layer 25K Schmerber membrane, WP zips and sealed seams.
- Breathability40cm side openings and breathable material JIS: 15,000g/sqm/24h
- Pockets6 pockets: three inside pockets (one zipped) + three exterior zipped pockets
- Novadry is Decathlon's high-performance waterproofing label. More than just a fabric, it is a dual-certified system that combines 3-layer technology with superior craftsmanship. It creates an effective barrier against heavy rain, whilst allowing your skin to breathe. Score: Moisture escapes, but water doesn't get in, even under the most demanding conditions.
- This jacket is Novadry-certified as it meets both of the following requirements: - A proprietary 3-layer fabric technology - A certified waterproof construction process
- Waterproofing is measured in mm Schmerbers: the higher the value, the more waterproof the fabric. At 25,000 Schmerbers, this jacket can withstand a 25-metre water column before moisture penetrates. To guarantee this level of protection, it has been tested under simulated rainfall at 100 litres of water for 3 hours. Score: reliable protection, even over long periods of heavy rain.
- The Schmerber rating indicates a fabric's resistance to water pressure: the higher the value, the more waterproof the fabric. With a rating of 25,000 Schmerbers, this jacket can withstand the pressure of a 25m water column. This ensures optimum protection even in heavy rain.
- A membrane fabric that is both waterproof and moisture-wicking. This jacket has a three-layer design. This means that the membrane is integrated between the outer and inner fabrics. This design guarantees both robustness and performance.
- The drawback of waterproof jackets is often their lack of breathability. They keep you dry on the outside, but trap humidity inside. To avoid this, our jacket uses a breathable fabric and has large side openings for better moisture management.
- The JIS L 1099 B1 test measures the water vapour that passes through the fabric in 24h, in grams per sqm. The higher this value is, the more breathable the fabric. A performance rating of 15,000g/sqm/24h, corresponding to a highly breathable fabric, is ideal for walking in the mountains.
- Close the zips, turn the jacket inside out and machine wash at 30°C. Use a small amount of detergent (preferably for waterproof garments) and run a second rinse to remove any residue. Wring out lightly to preserve the quality of the jacket.
- There are three ways to reactivate water-repellent properties: - Tumble dry the jacket for 15 minutes. - Wash with our special detergent and apply the reactivator. - Use the water-repellency reactivating spray.