Set off on half-day adventures with friends or family thanks to this complete inflatable kayak pack for 1 or 2 people.
Go on half-day trips with this inflatable kayak pack for 1 to 2 people. Stable and easy to assemble, it offers plenty of legroom and space for all your stuff.
- Glide performance2
- Glide performanceEntry-level model for your first kayaking experiences.
- Stability4
- StabilitySide stoppers and wide inflatable board for excellent stability.
- Easy assembly / dismantlingInflation in 7 minutes to a pressure of 1.5 PSI (0.1 bar) Do not over-inflate.
- Easy transportThe kayak can be transported folded in its backpack.
- Inflated size: - Length: 340 cm - Width: 103 cm Folded dimensions in bag: - Height: 67 cm - Width: 44 cm - Thickness: 30 cm Weight: 14 kg Maximum pressure: 0.1 bar (1.5 psi) Number of seats: 1 or 2 seats with a limit of 150 kg (331 lbs). Paddles: 2x 4-part paddles Pump: 1 manual pump Pack contents kayak, 2 seats, 2 paddles, pump, bag, repair kit, fins.
- This kayak features an inflatable seat and a low backrest for lumbar support. The seats are positioned according to the number of paddlers. To set them up: use the markings on the floor as a guide
- Inflate the floor, then one of the side tubes, then the second one to 50%. Check the positioning of the bladders, then fully inflate to a maximum pressure of 0.1 bar (1.5 PSI). Then close the valves. Do not over inflate! Do not leave the kayak inflated in direct sunlight. In the event of EXTREME HEAT, slightly deflate the kayak out of the water to avoid over-inflation, which could damage the kayak. Install the three skegs, unless using on a river with a low water level.
- Rinse the kayak and leave it to dry. Deflate the kayak by opening the 3 Boston valves. Fold the lateral tubes down onto the floor. Roll starting from the opposite side to the valves to remove the air. Place the rolled-up kayak into the main compartment of the bag. Tighten using the compression strap. Zip up the bag
- If a side bladder is damaged, unzip the side tube lengthways and remove the bladder. The floor can be uncovered by opening the rip-tab fastenings. - Case 1: the hole is in the side tube; you can use the repair kit to stick on a patch. - Case 2: the hole is located along a seam; contact the DECATHLON workshop service to exchange the faulty bladder (two-year warranty).
- Is your canoe-kayak inflatable or rigid and is less than 3.50 metres? You have what is called a beach craft. You must always stay within 300 metres of a shelter (any place on the coast where any craft or vessel and its crew can get to safety by anchoring or berthing, and set off again without assistance). Buoyancy life vests are not mandatory but strongly recommended to make it easier to get back in the boat if you fall out.
