Our camping designers have created this self-inflating, thick Comfort mattress for two campers looking for comfort and an easy set-up.
Our motivation? To give you a 132 cm, thick, pairable self-inflating mattress for optimal comfort when you're camping.
- Sleeping qualitySizes: 200 x 132 x 4.5 cm | Flat non-slip sleeping surface
- Easy assembly / dismantlingInflation without a pump | Double valve: precise inflation and quick deflation
- Thermal insulation4 seasons of use. R-Value standard ASTM F3340-18: 5,2
- Compatibilitytrue
- CompatibilityUse the zips to twin it with the same Single or Double Comfort mattress
- RobustnessMattress approved to withstand at least 200 inflation/deflation cycles
- Noise levelLess creaking noises when you move around during the night
- A self-inflating mattress consists of an airtight envelope glued to an open cell foam in which the air circulates. When you unfold the mattress, it will return to its original shape and thickness (4.5 cm for the AG Comfort) and fill with air accordingly. However, it requires some mouth inflation so you can adjust it to the pressure level suitable for you. Self-inflation is more or less noticeable depending on the thickness of the mattress.
- We advise you to get out and unroll your mattress as soon as you set up camp. Leave the valve open to make pre-inflation easier. A self-inflating mattress inflates itself to about 80%. You will need to blow up the rest yourself, so you can adjust the pressure to your desired comfort level. Caution: choose your mattress width according to your tent's interior measurements.
- Since the beginning of 2020, a new standard has been validated to assess the level of insulation of your mattress: standard ASTM F3340-18. This standard measures the capacity of the mattress to retain or return body heat in order to avoid its loss and therefore provide you with thermal comfort. Thermal insulation thanks to the foam. R-Value standard ASTM F3340-18 self-inflating mattress GA COMFORT: 5.2 (measured by an independent laboratory)
- The R-value expresses the thermal performance and resistance of the mattress. The higher the R-Value, the more the mattress insulates you from the cold ground. - R-value from 0 to 1.9: mattress designed for use in warm season (summer) only - from 2 to 3: mattress design for use in 2 or 3 seasons (spring/summer/autumn) - from 3 to 4: 4 season mattress, winter use possible - higher than 4.5: winter use and extreme conditions
