Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tyres with a 48mm Presta valve.
Need to replace your inner tube? Our 48 mm Presta valve 700 inner tube is suited for road biking. Easy assembly and removal using a tyre lever.
- Compatibilitywith 700 diameter tyres, 23 to 32 mm across. ETRTO 23/32 - 622
- WaterproofOptimised composition to ensure your inner tube has a good seal.
- To properly maintain your bike, it is important to know the exact dimensions of your tyres.This information is found on the sidewall of the tyre (diameter and section).For example, 27.5x1.90 means a tyre with a diameter of 27.5 inches and a width of 1.90 inches. On the sidewall, you will also find the dimensions in mm in the international ETRTO unit. For example, 50-584 means a tyre that is 50 mm wide and has an inner diameter of 584 mm (approximately 27.5x2.00).
- Simplify tyre removal with B'TWIN tyre changers.
- Check your tyre for wear and make sure there are no objects stuck inside.Also check the rim and the rim base:even a small crack can damage your inner tube.
- Before installation, watch our explanatory video.Pre-inflate the inner tube, insert the valve into the appropriate hole, install it in the tyre, then gently push it into the rim.
- Always start installationat the valve.Finish at the other end without using tools to avoid damaging the inner tube.
- Always inflate to the pressure specified by the manufacturer, which can be found on the tyre.Check that the tyre remains aligned throughout the inflation process..
- A simple pressure check before setting off can prevent a puncture caused by a pinch and optimise your bike's performance.
- https://conseilsport.decathlon.fr/comment-changer-sa-chambre-a-air
- 102 g
