This inner tube allows you to continue cycling when a conventional inner tube would have gone flat.
Compatibility700x35 to 700x45 tyres and 700c (28") wheels. ETRTO 35/45 - 622
Lasting air retentionOptimised composition to ensure your inner tube has a good seal.
Puncture resistanceThe liquid in the inner tube seals small punctures (< 3mm).
Good to know
To keep your bike properly maintained, it's essential to know the exact dimensions of your tyres.You'll find this information on the tyre sidewall (diameter and cross-section).For example, 700 x 35 means your tyre is 700 mm in diameter and 35 mm wide. On the tyre sidewall you will also find the dimensions in mm in ETRTO international units. For example: 35-622 means your tyre is 35 mm wide with an inner diameter of 700 mm (so 700 x 35)
The ideal pressure is shown on the sidewall.As you inflate, check that the tyre is settling into place evenly.
For error-free installation:watch the video, inflate to 0.2 bar, insert the valve, place the inner tube inside the tyre, then in the rim, all this nice and gently.
To prevent any risk of puncture by pinching, systematically check the tyre pressure efore each ride.
280 g
Effortlessly remove your inner tube using our B'TWIN tyre levers.
Before pumping, make sure nothing's rubbing against the tyre, that the rim strip is smooth and correctly positioned, and that the rim has no sharp parts or deformations.
No tool to mount your tyre:start at the valve and finish by hand, on the opposite side.
Fit this Schrader valve inner tube to your 700x35 to 700x45 tyres. Its puncture-prevention fluid repairs punctures instantly, allowing you to carry on cycling without a hitch.