Inflate your stand up paddle board and canoe/kayaks to 20 PSI. This dual-action hand pump enables you to easily inflate to more than 15 PSI
This dual-action high-pressure pump has two modes: one to increase volume, and one to reach the right pressure of the craft. The deflation mode makes it easier to store your SUP or kayak.
- Ease of use2 MODES mode 1: inflation (0-8 psi) mode 2: pressurisation (8-20 psi)
- VersatilityCan be used to inflate and deflate your inflatable
- Parameter measurementBuilt-in 3-20 psi pressure gauge. Accurate from 3 PSI.
- Ergonomic gripWide feet for maximum stability. Ergonomic handles for comfort.
- Compact designClip-on hose for easy transport and storage.
- RobustnessHeavy-duty hose with rotating head to prevent disconnecting during inflation.
- RepairThe hose, pressure gauge, handle and aluminium tube are available as spare parts
- 1/Stand on level and solid ground 2/Check that the hose is attached on the INFLATE side 3/Connect the hose to the inflatable 4/Turn the orange ring to position 1 5/Inflate the craft until it becomes difficult (approx. 8 PSI) 6/Turn the orange ring to position 2 7/Finish inflating to the recommended pressure. Pump supplied with 2 seals on the inflation nozzle to fit most valves on the market. (orange: ITIWIT/black: other)
- Use the 2 fastening clips to attach the hose and pump together. Do not stand on the pump or the hose. Clean off any sand, it can damage the seals.
- Height: 60 cm Width: 27 cm Depth: 12 cm Hose length: 100 cm 60 mm diameter piston for easy high-pressure inflation. Easy to inflate for everyone.
- In addition to its standard adapter to inflate your dropstitch SUP or kayak to high pressure, the pump also comes with: A "Mini Boston" adapter to inflate the kayak seats a "Boston" adapter to inflate low-pressure kayaks, inflatable air mattresses and tents. An adapter and end piece to inflate certain kitesurfing wings.
- We design our products so that they are as repairable as possible. The following spare parts are available for this pump: Handle + Pressure gauge: 8810939 Aluminium tube: 8810947 Hose: 8810949