Looking for freedom? Our designers developed this roof tent, which is quick and easy to fit on roof bars, so that you can go wherever you want to go.
The advantage of this car roof tent? Comfort with a large living area and an integrated foam mattress. Enjoy a cool environment even in the middle of summer thanks to the Fresh & Black technology.
- Easy assembly / dismantlingPitch and dismantle in less than 5 minutes
- RoominessBedroom (W) 140 x (L) 240 x (H) 106 cm Mattress 139 x 237 x 5 cm density 26kg/m3
- Heat reductionFlysheet, mechanical air vents, Fresh & Black fabric for a good night's sleep.
- Wind resistanceResistance to wind speeds up to 60 km/h: validated in wind tunnel
- WaterproofWater column (Schmerber): Flysheet > 2,000 mm.
- CompatibilityCompatible with approved roof bars
- Compatible with approved roof bars for a load greater than 75 kg (dynamic weight). The usable width is 78 cm, the distance between the roof and the top of the roof bar must be greater than 7.5 cm and the width of the roof bar tube must be less than 9.5 cm (see the diagrams in the product sheet photos). Check that your roof bars and tent are properly fastened each time you use it. It's not compatible with longitudinal roof bars.
- This tent needs a 75 kg load capacity, a so-called "dynamic" load, i.e. when the vehicle is moving. When the vehicle is stationary, the maximum static load capacity is much higher. Don't worry, once installed and stationary, your roof bars will be able to support the roof tent, as well as the weight of the people inside (200 kg in total).
- Watch the pitching tutorial video and/or read the instructions in the product bag carefully. Remove the cover and unclip the two side buckles. Grab the ladder and use it to tilt the tent. Adjust the ladder so that the tent is flat, and properly secure the bars, so that they are locked in place before you can stand on them. To dismantle, use the ladder to fold up the tent, close the side buckles and put the cover back on.
- - 1 tent (bedroom + fly sheet) - 1 waterproof cover - 1 integrated foam mattress - 1 aluminium ladder measuring 2.5 m max. when unfolded - 1 screw kit (4 plates + screws and washers) - 1 shoe pocket - 1 attachment strap for accessories (located in the shoe pocket)
- As designers and users who love our playing field, we care about the resistance of our products, that's why all our tents are designed to be repairable. You will find the following parts for this tent in after-sales service: - cover - mattress cover - flysheet - bedroom - screw kit Find all the information on our support website
- Caution: NEVER GET INTO THE TENT IF THE LADDER BARS ARE NOT LOCKED IN PLACE. FALL HAZARD. (see instructions) Do not use the ladder for anything other than its intended purpose.
- Do not drive with the tent up. Do not drive if the edge of the cover is not inside the front rail. Do not use any accessories other than those supplied with the tent. Always set up the tent on a level surface so that it is stable. Do not install on vehicles with a sunroof. Do not pitch the tent facing the wind. Keep the instructions accessible.