RECCO® technology is used in the majority of ski resorts and increases the chances of being located in the event of an avalanche. The reflector, which is built into the jacket, can be located by rescue services via a detector. This should not replace responsible behaviour or the use of an avalanche transceiver.
The waterproof component and the assembly prevent water getting in. The seams are waterproof, and the zips are also waterproof and under a protective flap. This jacket has been tested in a special shower that reproduces the conditions of the ski resorts, and in the field for several days in different weather conditions.
A fabric's water-repellent property is its ability to let water slide off its surface without soaking in. The fabric doesn't soak up water and so remains lightweight, breathable and warm. It is made from a treatment on the outside of the fabric, which must be renewed (every 3 washes).
Its 3-layer material features lightweight padding that provides warmth only where it's needed. This jacket is still lightweight: in very cold weather, wear a padded jacket or fleece underneath.
The RET, or the evaporative resistance of the material (ISO 11092 standard), is 12. The lower this rating, the more water vapour generated by the body evaporates. RET < 9 = extremely breathable 9 < RET < 12 = very breathable 12 < RET < 20 = breathable RET > 20 = little or no breathability.
This is a very thin polyurethane film that makes the material waterproof while remaining breathable. More flexible, lightweight, resistant and often more breathable than coating, which is less expensive and requires a protective lining, similar to paint applied to the inside of the fabric.
For the two years of guarantee, if your product can be repaired, the repairs (hooks, seams, zips, etc.) are done free of charge. Beyond this period, they can still be done for a fee, locally at your usual shop.
Between 0.56 kg for the 2XS and 0.91 for the 2XKL. 0.71 kg in size M.
When skiing, we talk about the three-layer rule: A first thermal layer (ski base layer), a second layer (fleece or down jacket) and a third layer, your jacket. Adapt the second layer to suit the conditions, or take along a bag so you can take it off during the day.
The water-repellency of your jacket must be regularly reactivated (every three washes): over time, even if it remains waterproof thanks to its material, the jacket seems to start absorbing water. To do this, use a reactivating spray or a treatment reapplication product, and follow the tutorial in the customer service section of our website.
Close the zips, loosen the ties and read the instructions on the label. You can use a tumble dryer or leave to air dry, and finish off by using the hair dryer for five minutes (the heat helps with waterproofing). Find tutorials on our YouTube channel or our after-sales service website.
This garment has been validated in a shower test under 100L of water/sqm/hour for 3 hours. This test reproduces the conditions of a heavy mountain storm.
In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.
This product is repairable. We commit to repairing your product free of charge for the duration of the warranty. Whatever it is, fixings, seams, zips, etc. This service is offered in your usual store. If, however, we can't repair your product (non-repairable production defect), you can exchange it or get a refund.
All our Freeride jackets and trousers are equipped with the RECCO® system. With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.
We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment. Link: https://youtu.be/rh4GLwALgBM After three washes, restore the water repellent properties with a waterproof spray or wash-in product.
0.71kg in size M
The model in the photo is wearing a size M and measures 175cm. Measurements: Chest measurement: 92cm Waist measurement: 66cm Hip measurement: 89cm
Freeride with comfort in this waterproof, breathable jacket. For optimal comfort, use the integrated heat pads and ventilation features to control your temperature and tackle biting winds.
